Vessels and Equipment
Currently we have four mobile vessels on trailers and two we can transport by a flat deck truck.
Vessel 1
5.8 m Aluminium work boat with full dive spread on board, and is set up with a davit winch for inspection work and mooring maintenance. In C survey with a 150 hp EFI Outboard on trailer.
Vessel 2
5.1 m Aluminium Work boat, side console with davit winch and full dive spread. In C survey with a 60hp 4 stroke on trailer.
Vessel 3
6.7 m Aluminium work boat also with full dive spread on board, and is used also for inspection work and heavy salvage work ie; sunk vessels and air bag lifting. In C Survey with a 150hp EFI Outboard. Also with a davit winch also on trailer.
Vessel 4
6.5 m Aluminium work boat with full dive spread on board. Also with davit. In C Survey with a Hamilton Jet for shallow water work, and also on trailer.
Vessel 5
9.2m Aluminium Seaquest built cat in a 2 C Survey. 4 x 2 crew. Full electronics on board and has a range of 300nm with twin 225 Yamaha 4 stroke outboards. On board we have a hydraulic power pack – full dive spread, 300kg luffing stern A frame (hydraulic) deck winch. Centre mount bench seating for crew transfers, side gantry arm and davit. Transport by Flat bed truck.
Vessel 6
10.7 m Aluminium Custom Build Cat in 2 C Survey. 12 x 2 crew with full electronics. Twin 350hp Yamaha 4 stroke outboards, with a range of 350 NM @ 30 knots. Step through transome specific for dive ops and also has a full dive spread onboard with comms and a 240 volt inverter with 12 volt outlets. Currently located in Broome. Is trailerable.
Vessel 7
11.5 m Aluminium Flat Deck Barge with twin hydraulic shallow water drive units, with a beam of 4.5 m and a certified deck load of up to 10 ton. Front loading ramps if a need for machinery to be driven up onto the deck. In current 2D survey. Transport by flat deck truck. Currently in Fremantle.
Truck
New 3 tonne duel cab (crew cab) with 4m tray and 1.5 tonne hiab mount.
1 ton Ute
New.
Air Bags (under water Lifting)
1 x 10 tonne - JW Marine
2 x 5 tonne - JW Marine
4 x 2 tonne - JW Marine
4 x 1 tonne - JW Marine
6 x 0.5 tonne - JW Marine
4 x 250kg - JW Marine
2 x 100kg - JW Marine
Air Lifts for removal of sand, mud, debris. Numerous sizes and air compressors.
Broco Underwater Cutting (Thermic Lance)
Two complete sets for cutting up to depths of 25 metres.
Underwater Welding
One 400 amp DC Welder and leads.
Underwater Camera and Video Gear with recording
4 Sets (Complete) of dive equipment and spread with communications to AS 2299
Kirby Morgan Hats 18 – 28 – EXO 26 – Superlite 17 B – Superlite 17K
3 x Dive Compressors 9 15 – 18- 25 CFM)
8 x Bail out Bottles
20 x Scuba Cylinders
8 x Dive Harness
2 x Spiro Sub AGA with Comms
Power Tools - Pneumatic and Hydraulic C – Chainsaws, Drills, Grinders, Procusion Drills, Impact Drivers
HPU Pack (Hydraulics)
100CFM Road Compressor
Contact
Glen Johnson
t: 0419 048 670
p: 08 9402 5009
f: 08 9402 5009
e: glenjohnson68@bigpond.com
or
offshoredivingservices@bigpond.com
7 Leichhardt Ave, Padbury 6025
Unit 1/24 Triumph Ave, Wangara 6065
Offshore Affiliates
ACM – Australian Commercial Marine
PCDS – Pacific Commercial Diving Supplies
Unirig – Mooring & Rigging Equipment
